NEWS

NEWS

NEWS

News Center


03-02

Wholesale Hydrogen inhaler suppliers china

When everyone pays attention to the pure hydrogen type Wholesale Hydrogen inhaler suppliers china, one of the more important things is to understand its hydrogen production mode/principle. At present, there are three main hydrogen production modes of Wholesale Hydrogen inhaler suppliers China on the market, hydrogen production by electrolysis of sodium hydroxide diluent (traditional hydrogen production by electrolysis of water), hydrogen production by magnesium powder, and hydrogen production by SPE electrolysis technology.

02-23

Discount Hydrogen inhaler Manufacturers china

02-16

Hydrogen inhalers in China

1. Turn off the flame. A hydrogen inhaler in china tells you that when the machine is not used for a long time, it should be turned off. 2. Shut down. 1) Make sure that the gas equipment of the Hydrogen inhaler in China has been turned off, if not turned off, it should be turned off first.

02-09

Hydrogen inhaler on sales

Care and maintenance. 1. Under normal circumstances, drain the electrolyte in the Hydrogen inhaler on sales machine and replace it with a new one after every six months of use. If the Hydrogen inhaler on sales is working normally (no change in gas production), then it should be maintained once a year. Please refer to Chapter 14 for cleaning and liquid replacement operations.

02-02

Considerations for Hydrogen inhaler Wholesale Price

1. Hydrogen inhaler Wholesale Price tells you that the external power supply of this machine is a three-phase four-wire 380V. If the neutral wire is not connected, the machine will not work, and the lack of phase operation will damage the machine. Hydrogen inhaler Wholesale Price tells you that use pure water, long-term use of unfiltered tap water may clog the pipes, it is recommended to use pure water to prolong the service life of the machine. The working environment temperature is 0-40 ℃, well ventilated, and it is forbidden to work in a closed environment.

01-19

Hydrogen inhaler For sale

The hydrogen inhaler For sale tells you how to set the gas production. After the power switch is turned on and the self-test of the hydrogen oxygen inhaler is completed (about 10 seconds), the gas production volume can be set. The method of the Hydrogen inhaler For sale is as follows: Slowly rotate the current adjustment knob clockwise, the meter will indicate the change of the gas production value, and set the appropriate gas production according to the gas consumption (if the last setting is used, it can not be adjusted).

01-12

Oxy hydrogen generator from China

1. Over Temperature indicator light (Over Temperature): Oxy hydrogen generator from China tells you that it means that when the machine was running last time, the electrolytic cell was protected by over temperature and it had not cooled down yet. Continue to wait until the fault indicator light goes out.

01-05

Oxy hydrogen generator suppliers china

Oxy hydrogen generator suppliers china tells you that if the following lights of the generator are on, it is a warning or abnormal. Oxy hydrogen generator suppliers china tells you that the system will deal with it according to different situations.

12-29

Oxy hydrogen generator Manufacturers china

Oxy hydrogen generator Manufacturers china tells you the generator app. Oxy hydrogen generator Manufacturers china tells you that hydrogen generators are mainly used in the glass industry and electronics industry, as well as annealing protection furnaces, etc., while hydrogen oxygen generators are mainly used in the cutting of various non-ferrous metals, carbon steel cutting, water injection, wire drawing and sealing in pharmaceutical factories, and others Various flame processing fields.

12-22

Oxy hydrogen Generators on sales

Compared with Oxy hydrogen Generators on sales, hydrogen generators are mainly used in the glass industry, electronic industry and annealing protection furnaces, etc., while Oxy hydrogen Generators on sales are mainly used in the cutting of various non-ferrous metals, cutting of carbon steel, and drawing of water injection in pharmaceutical factories. Sealing and various other flame processing fields.
< 1234...8 > proceed page

Email: akw001@aokewei.com

We will give you feedback in time

WhatsApp: +8613434225615

Tel:+13434225615

AUKEWEL