Oxy hydrogen generator from China introduces some indicators of the generator
Time of issue: 2023-01-12 11:04:37.000
1. Over Temperature indicator light (Over Temperature): Oxy hydrogen generator from China tells you that it means that when the machine was running last time, the electrolytic cell was protected by over temperature and it had not cooled down yet. Continue to wait until the fault indicator light goes out.
2. The overvoltage indicator is on (Over Pressure). Oxy hydrogen generator from China tells you that when the machine was shut down last time, the residual gas was not released. At this time, the valve of the gas equipment should be opened to let off part of the residual gas. Otherwise, in the next step (setting the electrolysis current), there will be no Displays of the set current, not the no-load current.
3. The pump running indicator is on (Pump Running). Oxy hydrogen generator from China tells you that the machine is replenishing water into the main tank or flashback tank, which is normal. The pump running indicator light should not be on for more than 3 minutes. If it exceeds 3 minutes, it is abnormal. The possible reason is that the auxiliary water tank is short of water, so the high-pressure diaphragm pump cannot pump the water in the auxiliary water tank and cannot complete the water replenishment requirements. The pump was running all the time trying to get the water into the secondary tank.
Through the above introduction and analysis of the Oxy hydrogen generator from China introduces some indicators of the generator, hope it helps you.
Add: No.19, Yongfeng Road, Yongshan village, Shiqi, Panyu District, Guangzhou
@2020 All Rights Guangzhou AUKEWEL Electronics Co., Ltd ICP1602645 Powered by：www.300.cn guangzhou.300.cn SEO